Product Description

The square pressure polishing machine strength controlled by four angle, thus the pressure is more precise to control and the final products has higher precision. This CX**0C fiber polishing machine's pressure is fixed, just like the SFP***0C. All the components inside this fiber polishing machine (such as polishing plate,  eccentric drive, toothed gear) are adopt USA QPQ metal hardening technology, Surface hardness up to *5 degrees, it is highly wearable. The settlement is almost zero. So we do not need to adjust the pressure and exchange the lubricating oil. If you want produce high quality connectors, this type is your best choose.
 For PC terminations above *5% (usually up to **0%)could pass 3D interferometer test, while for APC terminations this rate keep *0%.
Each polishing jig for this machine is available as LC,SC, ST,FC,MTRJ,E***0 PC connector as well as angle polishing
Main features:
May process each kind of standard fiber optic connectors, such as FC/UPC/APC,SC/UPC/APC, ST/UPC/APC, LC/UPC/APC, ,MU/UPC/APC, MTRJ,E***0/UPC/APC etc.
Convenience for adjusting pressure,unloading and replacing jigs.
Designed for volume production , high productivity(Can polishing ****2 connectors per time)
Excellent connector and face polishing quality, the percentage of products sent back for repair is very low.
Save material and low cost for grinding.
Easy to use and stable.
Display grinding speed which can be adjusted any time.
Toothed gearing, more stable and deep-set.
Made by high quality, hardened steel S**6 imported fromGermany
Using the good motors imported (ensuring the movement stable under ultra long time)
The electron primary device is imported from OMRON (ensuring the electrical specification stable)
Ferrule diameter:
2.5 mm (0.***4 inch)1.*5mm(0.***2 inch).
Ferrule material:
Zirconia (ZrO2),Quartz capillary, Glass materials, Colophony material Stainless steel and titanium alloy
Main parameter：
Machine Working Voltage: AC**0V(AC**0V can be offered)
Polishing chassis diameter：**7mm
Polishing chassis beating：≤5um
Machine net weight：*4KG
Machine size：**0L***0W***0H
Polishing time setting：0~*9 hours *9 Minutes *9 second
Polishing jigs for Square pressure polishing machine: